Copyright © 2012 CyberPower Systems, Inc.
LCD SETUP FUNCTIONS
1
0
LCD INFORMATION READOUT
There are 12
types of UPS information available for display on digit area.
Information Submenu
Description
OUTPUT XXX V
Displays the Output Voltage
OUTPUT XX.XHz
Displays the Output Frequency
OUTPUT XXX (k)VA
Displays the Output VA
OUTPUT XXX% VA
Displays the Output Load Percentage of Maximum Apparent Power
OUTPUT XXX (k)W
Displays the Output Wattage
OUTPUT XXX% W
Displays the Output Load Percentage of Maximum Active Power
INPUT
XXX V
Displays the Input Voltage
EVENT
XXX
Displays the Event ID
ESTIMATED RUN TIME
%
Displays the Estimated Percentage of Battery Capacity
ESTIMATED RUN TIME
XX(.)X [Min][Hr]
Displays the Estimated Run Time with battery
TIME TO SHUT DOWN
XX(.)X [Min][Hr]
Displays the Time Delay to Shutdown UPS
TIME TO TURN ON
XX(.)X [Min][Hr]
Displays the Time Delay to Restart UPS
LCD SETTINGS CONFIGURATION
There are 7
UPS settings that can be configured by the user.
1.
Press the “
ESC
” button to activate the setting mode.
The first configuration parameter will be displayed on the LCD screen.
2.
Press the “
ENTER
” button to select the setting you want to configure.
3.
Press the “
▼
” buttons to scroll through the different parameters.
Press the “
ENTER
” button to select the parameter you want.
4.
Press the “
ESC
” button to cancel and exit setting mode. Press the “
ENTER
” button to save all the settings you just do and
exit setting mode.
