CyberPower CPS600E-DE, Руководство пользователя

Страница: 8 / 44

8
LCD Warning
Display
Alarm
Condition Solution
Over Load Icon Constant tone
Over Load Output-Off
- Load exceed the
rating of EPS. Check total load to
confirm the rating of
EPS.
Zero Output Voltage Constant tone
High Temperature
Output-Off
Check fans function
and air vent
clearances.
Low Battery
Output-Off
-- Insufficient battery
capacity.
Recharge the battery.
Over Charge or AVR
Error-- In Line Mode,
battery is overcharged
or AVR is faulty.
Inform service agents.
Short Output-Off --
Output Short Circuit
Protection Check the EPS output
to see if there is a
short circuit.
Can Not Start Up None
Line Input/ Output
Error Output-Off --
incorrect Input/ Output
connection
Check Input/ Output
connection.
Cold Start Battery
High Voltage
Output-Off -- the
battery voltage is too
high during cold start.
Check the reason for
battery over-voltage.
TROUBLESHOOTING
Problem Possible Cause Solution
Outlet does not provide
power to equipment.
Input fuse is blown due
to overload.
Turn the EPS off and unplug the connected
equipment. Unplug the power cord of the
EPS then remove the fuse compartment
beneath the AC inlet of the EPS and
replace the blown fuse with a spare one.
Lock the compartment back to the EPS.
Connect power cord then turn the EPS on.
Make sure that your spare fuse meets the
specification and the equipment plugged
into the outlet does not exceed the UPS
unit’s rated capacity.