CPS1000AVR
Guaranteed Uninterruptible Power System
13
CONDITIONS COMMON TO THE LIMITED
WARRANTY AND THE POWER CONTROL GUARANTEE
The Limited Warranty and the Power Control Guarantee are the only and the exclusive express warranty of CyberPower with respect to the Product.
This exclusion of other express warranties applies to written and oral express warranties.
Any Implied Warranty of Merchantability or for Fitness
for a Particular Purpose, if applicable to the Product, is limited in duration to the period of ownership by the Initial Customer. This
provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not Otherwise apply to
the Product. NOTE:
Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
LIMITATION: THE LIMITED WARRANTY AND THE POWER CONTROL GUARANTEE DO NOT COVER
The Limited Warranty and the Power Control Guarantee are intended to exclusive rights and remedies and replace any other rights, to the extent
allowed by law.
1.
As to CyberPower products, the Limited Warranty does not cover or apply to: Misuse; modification; operation or storage outside
environmental limits for the Products; in transit, in shipment, or in storage, damage or deterioration; improper operation or
maintenance; use with items or equipment not designed or intended for use with the Product.
2.
As to Connected Equipment, the Power Control Guarantee covers only damage within the specific terms of the Power Control
Guarantee to Connected Equipment (and only up to the applicable aggregate ceiling amount). The Power Control Guarantee does
not cover damage to Connected Equipment or apply if the product has been operated in a failure mode or not in compliance with
CyberPower operating instructions and manuals and/or with the instruction and manuals of its manufacturer/vendor.
The Limited Warranty and the Power Control Guarantee Do Not Apply Unless The Initial Customer:
1.
Has properly connected the Product and the Connected Equipment to properly wired and grounded outlets/power supplies (including
compliance with electrical and safety codes of most current National Electrical Code, ANSI/NFPA 70), without the use of any adaptors,
extension cords, or other connectors.
2.
Has provided a suitable and proper environment for use and installation of the Product and Connected Equipment.
3.
Has properly installed and operated the CyberPower Product and Connected Equipment.
CyberPower Does Not Cover or Undertake Any Liability in Any Event for Any of the Following:
1.
Loss of or damage to data, records, or software; restoration of data or records; or reinstallation of software.
2.
Damage from causes other than AC Power Line Transients, spikes, or surges on properly installed, grounded and code-compliant
120 volt power lines in the United States and Canada; transients, surges, or spikes on standard telephone land lines, PBX telephone
equipment lines or Base 10/100T Ethernet lines, when properly installed and connected. (This exclusion applies, for example, to
fluctuations in data transmission or reception, by CATV or RF transmission or fluctuations, or by transients in such transmission).
3.
Damage from any circumstance described as excluded above with respect to the Product.
4.
Damages from fire, flood, wind, rain, rising water, or leakage or breakage of plumbing; from abuse, misuse, or alteration of either the
Product or the Connected Equipment.
Exclusion of Consequential and Other Damages.
The sole and exclusive remedies of the Initial Customer are those provided by the Limited
Warranty and Power Control Guarantee.
CyberPower excludes any liability for personal injury under the Limited Warranty and Power
Control Guarantee. CyberPower excludes any liability for direct, indirect, special, incidental or consequential damages, whether for
damage to or loss of property, loss of profits, business interruption, loss of information or data, EXCEPT FOR (AND ONLY FOR) the specific
limited agreement of CYBERPOWER to provide certain warranty benefits regarding “Connected Equipment” under the “CYBERPOWER
Power Control Guarantee”. NOTE:
Some States or Provinces do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation may not apply to you.
DO NOT USE FOR MEDICAL OR LIFE SUPPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.
CyberPower does not sell the Products for use in high-risk activities. The Product is not designed or intended for use in hazardous
environments requiring fail-safe performance, including the operation of nuclear facilities, aircraft navigation or communication systems,
air traffic control, weapons systems, life support or medical applications or for use in any circumstance in which the failure of the Product
could lead directly to death, personal injury, or severe physical or property damage, or that would affect operation or safety of any medical
or life support device (collectively, “High Risk Activities”). CyberPower expressly disclaims any express or implied warranty of fitness for
High Risk Activities. CyberPower does not authorize use of any of its products use in any High Risk Activities. ANY SUCH USE IS
IMPROPER AND IS A MISUSE OF CYBERPOWER PRODUCTS.
The Limited Warranty and the Power Control Guarantee are governed by the laws of the United States and the State of Minnesota, without
reference to conflict of law principles. The application of the United Nations Convention of Contracts for the International Sale of Goods
is expressly excluded.
Contact Information:
CyberPower’s address is 5555 12th Ave East, Suite 110, Shakopee, MN
55379 and its phone number is (952) 403-9500. CyberPower is the warrantor under this Limited
Warranty. You may also contact CyberPower on the Internet at www.cyberpowersystems.com.