Chapter 3. Using Your ATS
3.5
3. From the
Target configuration
list (see
), choose the appropriate target
configuration file for the equipment you are working on. If the file isn’t shown in the list,
choose
Select
, which is always the last entry in the
Target configuration
list, or choose
the menu item
File > Select Target Configuration File
to locate the file. If you don’t
choose a target configuration file, ATS can’t search for the target, and the
Find Once
button and
Continuous find
box are disabled. For information on creating target
configuration files, see
“Creating Target Configuration Files,” on page 4.1
.
Figure 3.3: Target Configuration List
4. Click
Find Once
).
After a few seconds, the teaching wafer finds the target and sends the information to the
TeachView application. TeachView displays the measurements in numeric readouts (see
Figure 3.4: Numeric Readouts
Target
configuration
list
Find once
Numeric
readouts
