Cybernet CyberMed N19, Руководство пользователя

Страница: 18 / 25

CyberMed N19 User Guide
Page 11
CyberMed N19 Disassembly
ORIENTATION: These instructions assume that the top of the CyberMed is away from
you and the bottom or I/O controller board is nearest you.
1.
Place the CyberMed N19 face down on a padded surface.
2.
Remove the four screws from the base plate that attach the stand to the LCD,
supporting the base while removing the last screw.
3.
Remove the ten back bezel screws.
4.
Carefully remove the back bezel and set aside.
5.
Then remove the metal EMI shield by first removing the I/O cover: remove the
three screws on the bottom and two screws on the face. Lift the plate out and up
and set aside.
6.
Remove the remaining eleven screws around the metal shield covering the
motherboard.
7.
First lift the metal shield and then slide it to the right, clearing the optical drive door
(at the top right).