CyberData VoIP Indoor Intercom 011030, Руководство по эксплуатации

Страница: 26 / 46

CyberData Corporation 930260A Operations Guide
Installing the VoIP Indoor Intercom
Configure the Intercom Parameters
18
3. After changing the parameters, click Save Settings . This updates the changed parameters and
reboots the Intercom if appropriate.
4. Connect the Intercom to the target network.
5. From a system on the same network as the Intercom, open a browser with the new IP address of
the Intercom.
Default Gateway Enter the Default Gateway address.
DNS Server 1* Enter the DNS Server 1 address.
DNS Server 2* Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the Intercom Setup page.
Link to the SIP Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-5. Network Setup Parameters
Web Page Item Description