CyberData InformaCast Enabled 011406, Руководство по эксплуатации

Страница: 103 / 133

Operations Guide 931281I CyberData Corporation
2. On the Autoprovisioning page, you may enter values for the parameters indicated in Table 2-
24 .
Note The question mark icon (
) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Table 2-24. Autoprovisioning Page Parameters
Web Page Item Description
Disable Autoprovisioning Prevent the device from automatically trying to download a
configuration file. See
Section 2.3.13.1, "Autoprovisioning" for
more information.
Autoprovisioning Server Enter the IPv4 address of the provisioning server in dotted
decimal notation.
Autoprovisioning Filename The autoprovisioning filename is the configuration filename.
The default autoprovisioning filename is in the format of
<mac address>.xml .
Supported filename extensions are .txt, and .xml. The current
filename is denoted by an asterisk at the bottom of the
Autoprovisioning Page . Enter up to 256 characters.
A file may have any name with an xml extension. If a file
name is entered, the device will look for the specified file
name, and only that file.
Use tftp The device will use TFTP (instead of http) to download
autoprovisioning files.
Verify Server Certificate When using ssl to download autoprovisioning files, reject
connections where the server address doesn't match the
server certificate's common name.
Username The username used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
Password The password used to authenticate with an autoprovisioning
server. Leave this field blank to disable authentication.
Autoprovisioning Autoupdate

(in minutes)
The reoccurring time (in minutes) the device will wait before
checking for new autoprovisioning files. Enter up to 6 digits. A
value of 0 will disable this option.
Note : To use the auto update options, enable the Set Time
with NTP Server on boot setting on the Device Page
page (see Table 2-11 ).
Autoprovision at time (HHMMSS) The time of day the device will check for a new
autoprovisioning file. The time must be 6 characters in length
and in HHMMSS format. An empty value will disable this
option.
Note : To use the auto update options, enable the Set Time
with NTP Server on boot setting on the Device Page
page (see Table 2-11 ).
Autoprovision when idle

(in minutes > 10)
The idle time (in minutes greater than 10) after which the
device will check for a new autoprovisioning file. Enter up to 6
digits. A value of 0 will disable this option.
Note : To use the auto update options, enable the Set Time
with NTP Server on boot setting on the Device Page
page (see Table 2-11 ).