CyberData Corporation Rev C 2/06
010776A
4-Port PoweredUSB 2.0 Hub with Dell Retail Integrator Kit
Chapter 1 Installing and using the Hub
Connections
12
Host connector
The connection to the host computer is achieved via a standard USB 2.0 certified Hi-Speed “A” to
“B” cable that is included in the Accessory Kit, or with any equivalent USB 2.0 certified Hi-Speed
cable. Refer to the
“Product components list” on page 8
for information about the Accessory Kit. See
”Figure 6”
and
”Figure 9”
for views of the Hub cable routing to the Dell Retail Integrator.
Figure 6:
Dell Retail Integrator—Hub Cable Routing
PoweredUSB connections
The PoweredUSB connections are standard USB “A” connectors with four extra pins to supply
higher voltages. See
”Figure 6”on page 12
. The lower portion of the “A” connector on this product
can be used alone, without the locking PoweredUSB connector.
4-Port Hub
Dell PC
4-Port Hub +24Volt
DC Plug-in cable
Dell Retail Integrator
Power Supply Brick*
4-Port PoweredUSB
Hub Power Supply
Brick (feet out)
AC in for 4-Port Hub
Power Supply Brick
Host USB Port
* Do not use the Dell Power supply Twist Locks to secure the Dell power supply
4-Port Hub USB 2.0
Host Connector
cable plug-in
