The IP Endpoint Company
Installation Quick Reference
Push-to-Talk V2 Ceiling Speaker
011180
, RAL 9002, Gray White, Standard
011181
, RAL 9003, Signal White, Optional
Quick Reference
930467B
© 2012, CyberData Corporation, ALL RIGHTS RESERVED
© 2012, CyberData Corporation, ALL RIGHTS RESERVED
930467B
Quick Reference
4.00 [101.6]
120°
VoIP Speaker
Mounting Template
Speaker Hole Diameter:
7.50 [190.5]
Screw Hole Diameter:
0.1875 [4.75]
Dimensions are in inches [millimeter]
Typical System Installation
Getting Started
• Download the
Push-to-Talk V2 Ceiling Speaker Operations Guide
PDF file from the
Documentation
page at:
http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2ptt/docs.html
• Create a plan for the locations of your speakers.
• Prior to installation, consult local building and electrical code requirements.
Parts
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
802.3af Compliant Ethernet Switch
IP Phone
1
2
3
4
5
6
IP Talkback
IP PBX Server
IP Speaker
Remote Call Button
Speaker
(1) Template for Speaker
and Screw Holes*
(3) #8 Nylon Thumb Nuts
(3) #8 Fender Washers
(3) 8-32 x 1 1/4” Mounting
Screws
(1) Call Button Assembly
(1) Wall Mounting Kit
(2) Mounting screws
(1) Speaker Assembly
(1) Drop Ceiling Mounting Kit
(1) Drywall Mounting Kit
(3) Plastic Ribbed Anchors
(3) #8 Sheet Metal Screws
* See the last page
of this document
