DRYWALL
CUTOUT
Step 1
Step 2
Step 3
CyberData Part #011098 or #011099
Step 1
Step 2
Step 4
ATLAS FEST-18SC Enclosure
Part Number 611038
12.6 [320]
2.7 [69]
14.2 [360]
PM LED
Ambient light detector
Mounting
Features
Dimensions
(sold separately by ATLAS, and not included with the Clock Kit)
(1) ATLAS FEST-18SC
(sold separately)
(2) ATLAS Sound FEST
Mounting Bracket
(sold separately)
(4) No.10 Nut with tooth washer
(comes with the ATLAS wall mount)
(4) No.10-32 x 0.375-inch Pan
Head Phillips Machine Screw
(comes with the ATLAS wall mount)
ATLAS FEST-18SC Enclosure Parts
Note
: All ATLAS parts are sold separately by ATLAS,
and are not included with the Clock Kit Adapter
(3) 8-32 x 1 1/4” Mounting
Screws (from the Ceiling
Speaker Drop Ceiling
Mounting Kit)
Use three 8-32 x 1 1/4” MOUNTING SCREWS
(from the Ceiling Speaker Drop Ceiling
Mounting Kit) to install the Version 2 Speaker
into the flush mount clock kit.
Install part number
611038
through the pre-cut
drywall into the Atlas sound enclosure.
3.
4.
Assemble the ATLAS® FEST-18SC enclosure.
2.
If you do not have the ATLAS enclosure, then
use the
TEMPLATE
on this document to drill
four holes in the wall for the anchors and screws.
1.
To mount a Clock Kit Flush Mount Adapter:
Route the Network cable into either the
top, bottom, or side knockouts (KO).
Ground Lug
Step 3