© 2014, CyberData Corporation, ALL RIGHTS RESERVED
930344E
Quick Reference
Quick Reference
930344E
© 2014, CyberData Corporation, ALL RIGHTS RESERVED
Features
DIP Switch Settings
DIP Switches
Speaker Volume
Network Link LED (
GREEN
/
YELLOW
)
Status LED (
GREEN
)
A steady LED confirms that the V2 Loudspeaker Amplifier is oper-
ational. The LED will blink during a page when it is online.
Network Activity LED (
GREEN
)
Power LED (
GREEN
/
BLUE
)
The power LED is a steady
green
in low power mode and a steady
blue
during high power
mode. The power LED will only blink either during a boot up or a phone call.
RTFM Switch
To broadcast a V2 Loudspeaker Amplifier’s current IP address, press and hold the RTFM switch
for a couple of seconds and then release it.
To restore the factory defaults, complete the following steps:
1. Press and hold the RTFM switch until you hear the V2 Loudspeaker Amplifier announce the
words, “restoring defaults” and “rebooting”.
2. Release the RTFM
switch. The V2 Loudspeaker Amplifier will be restored to the factory
default settings.
DIP Switch Settings—Low Power—802.3af Compliant (Default)
DIP Switch
Setting
Description
1
OFF
Sets PoE for 802.3af class.
2
N/A
Not applicable for power setting.
3
ON
Switch mode current set to
LOW
.
4
OFF
Low gain amplifier setting.
DIP Switch Settings—High Power—802.3at
a
a. If set to high power, the unit will not power ON with 802.3af compliant switch. You must use a
power injector in this mode (CyberData part number 011124).
DIP Switch
Setting
Description
1
ON
Sets PoE for 802.3at class.
2
N/A
Not applicable for power setting.
3
OFF
Switch mode current set to
HIGH
.
4
ON
Force high gain amplifier.
DIP Switch 2 Settings
DIP Switch
Setting
Description
2
OFF
Manual Vol
. The speaker volume is set manually by the analog
volume trimmer.
2
ON
Bypass
. Bypasses the manual volume control of the analog volume
trimmer and uses the web page volume settings.
7.938
[201.63]
6.281 [159.54]
Dimensions are in Inches [Millimeters]
Dimensions and Mounting Template
14.500
[368.30]
10.875 [276.23]
4.375
[111.13]
Cable Grommets (3 PLCS)
Dimensions are in Inches [Millimeters]
