Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Operations Guide
930324M
CyberData Corporation
26
2. On the
Device Configuration
page, you may enter values for the parameters indicated in
Table 2-12
.
Table 2-12. Device Configuration Parameters
Web Page Item
Description
Volume Settings
Speaker Volume
Shows the current speaker volume mode (
Analog
or
Digital
)
Speaker Volume (0-9)
Type the desired Paging Amplifier volume level into this field
(range is 0 - 9).
Line-In Playback Volume (0-9)
Type the desired line-in playback volume level into this field
(range is 0 - 9).
Relay Settings
Activate Relay with DTMF Code When selected, the relay can be activated with a DTMF code.
DTMF Activation Code
Type the desired DTMF activation code (25 character limit).
DTMF Activation Duration
(in seconds)
Type the desired DTMF activation duration (in seconds)
(1 character limit).
Activate Relay During Ring
When selected, the relay will be activated for as long as the phone is
ringing.
NOTE
: When the phone is set to
Auto Answer
, it will not ring and this
option does nothing.
Activate Relay During Night
Ring
When selected, the relay will be activated for as long as a night ring
tone is playing.
Activate Relay While Call Active When selected, the relay will be activated for as long as the call is
active.
Miscellaneous Settings
Two Speakers Connected
Select this option
if two speakers are connected to the Paging
Amplifier.
Beep on Initialization
When selected, you will hear a beep when the Paging Amplifier
initializes.
Auto-Answer Incoming Calls
When selected, the Paging Amplifier automatically answers incoming
calls.
Play Ringback Tone
Check this box to enable the device to play a ringtone while the remote
device is ringing.
Enable Line In Playback
When selected, whatever audio source that you have selected (mp3
player, internet stream, etc.) will be played.
Note
: The line in audio will be treated as low priority audio that will only
play if there is no other audio playing. When higher priority audio is
playing, the line in audio will be muted.
Click the
Save
button to save your configuration settings.
Note
: You need to reboot for changes to take effect.
Click on the
Test Audio
button to do an audio test. Generates a voice
message for testing the device audio quality and volume. It plays the
audio at the volume you have configured the paging amp for
Note
: If the test audio button is pressed while music is playing via the
Enabled Line In
feature, the music will be muted during the test audio
message.
