CyberData 10844, Руководство по эксплуатации

Страница: 23 / 42

Installing the VoIP Ceiling Speaker
Operations Guide 930095G CyberData Corporation
17
2. On the SIP Setup page, enter values for the parameters indicated in Table 2-7 .
3. After changing the parameters, click Save Settings .
Table 2-7. SIP Setup Parameters
Web Page Item Description
SIP Server* Enter the SIP server represented as either a numeric IP
address in dotted decimal notation or the fully qualified
host name (FQHN) up to 64 characters.
Remote SIP Port* Enter the Remote SIP Port number (default is 5060).
Local SIP Port* Enter the Local SIP Port number (default is 5060).
SIP User ID* Enter the SIP User ID (up to 30 alphanumeric characters).
Authenticate ID* Enter the Authenticate ID (up to 30 alphanumeric
characters).
Authenticate Password* Enter the Authenticate Password (up to 30 alphanumeric
characters).
SIP Registration* Enable/Disable SIP Registration.
Unregister on Reboot* • Select Yes to automatically unregister the speaker when
it is rebooted.
• Select No to keep the speaker registered when it is
rebooted.
Register Expiration* Enter the SIP Registration lease time in minutes (default is
60 minutes).
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will
cause a system reboot when saved.
Link to the Speaker Setup page.
Link to the MGROUPS Setup page.
Link to the Network Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.