
Operations Guide
931475A
CyberData Corporation
Installing the SIP Weatherproof Keypad Phone
Setting up the Device
38
SIP Server
Enter the SIP server address as an IPv4 address in dotted decimal
notation or a fully qualified domain name. This parameter also
becomes the host portion of the SIP-URI for the device's Nightringer
extension on the SIP server. This field can accept entries of up to 255
characters in length.
Remote SIP Port
The Remote SIP Port is the port number the device will use as the
destination port when sending SIP messages for the Nightringer
extension. The default Remote SIP Port is 5060. The supported range
is 0-65536. Enter up to 5 digits.
Local SIP Port
The Local SIP Port is the port number the device will use to receive
SIP messages for the Nightringer extension. This value cannot be the
same as the
for the primary extension. The default
Local SIP Port is 5061. The supported range is 0-65536. Enter up to 5
digits.
Outbound Proxy
Enter the Outbound Proxy address as an IPv4 address in dotted
decimal notation or a fully qualified domain name (FQDN). When an IP
address is configured, the device will send all SIP messages to this IP
address for the Nightringer extension. When an FQDN is configured,
the device will run DNS NAPTR, SRV, and A queries on the FQDN to
resolve an IP address to which it will send all SIP messages for the
Nightringer extension. This field can accept entries of up to 255
characters in length.
Outbound Proxy Port
The Outbound Proxy Port is port number used as the destination port
when sending SIP messages to the outbound proxy for the Nightringer
extension. A value of 0 will default to 5060. The supported range is 0-
65536. Enter up to 5 digits.
User ID
Specify the SIP User ID for the SIP server. This parameter becomes
the user portion of the SIP-URI for the device's Nightringer extension.
Enter up to 64 alphanumeric characters.
Authenticate ID
Specify the Authenticate ID for the SIP Server. This parameter is
required for SIP registration authentication. Enter up to 64
alphanumeric characters.
Authenticate Password
Specify the Authenticate Password for the SIP Server. This parameter
is required for SIP registration authentication. Enter up to 64
alphanumeric characters.
Re-registration Interval (in seconds)
The SIP Re-registration Interval (in seconds) is the SIP Registration
lease time, also known as the expiry. The supported range is 30-3600
seconds. Enter up to 4 digits.
Call Disconnection
Terminate Call After Delay
Automatically terminate an active call after a given delay in seconds. A
value of 0 will disable this function. Enter up to 8 digits.
Note
: This setting does not require a reboot for the changes to take
effect.
Codec Selection
Force Selected Codec
When configured, this option will allow you to force the device to
negotiate for the selected codec. Otherwise, the device will perform
codec negotiation using the default list of supported codecs.
Codec
Select the desired codec (only one may be chosen).
Table 2-11. SIP Configuration Parameters (continued)
Web Page Item
Description