CyberData 011433, Руководство по эксплуатации, Страница: 54 / 98

Operations Guide 931384A CyberData Corporation
Installing the Secure Access Control Keypad
Secure Access Control Keypad Setup
47
2.4.9 Configure the Sensor Configuration Parameters
The door sensor (pins 5 and 6) on the header can be used to monitor a door's open or closed state.
There is an option on the
Sensor page to trigger on an open or short condition on these pins. The
door sensor alarm will be activated when the Door Open Timeout parameter has been met.
The intrusion sensor is an optical sensor installed on the board and will be activated when the board
is removed from the enclosure.
Each sensor can activate the relay, or make a call to an extension and play a pre-recorded audio file.
1. Click Sensor menu button to open the Sensor page ( Figure 2-21 ).
Figure 2-21. Sensor Configuration Page
CyberData Security Keypad