Installing the InformaCast Enabled Paging Adapter
Restore the Factory Default Settings
Operations Guide
931767B
CyberData Corporation
27
On this page:
1. Specify whether you use
Static
or
DHCP
IP Addressing
by marking the appropriate radio
button. If you select
Static IP Addressing
, go to
2. For Static IP Addressing, also enter values for the following parameters:
•
The InformaCast Enabled Paging Adapter’s
IP Address
: The InformaCast Enabled Paging
Adapter is delivered with a factory default IP address. Change the default address to the
correct IP address for your system.
•
The
Subnet Mask.
•
The
Default Gateway.
Note
You must click on the
Save
button and then the
Reboot
button for the changes to take
effect.
Click the
Save
button to save your configuration settings.
Click on the
Reboot
button to reboot the system.
Click on the
Toggle Help
button to see a short description of some of
the web page items. First click on the
Toggle Help
button, and you
will see a question mark (
) appear next to some of the web page
items. Move the mouse pointer to hover over a question mark to see
a short description of a specific web page item.
Table 2-7. Network Configuration Parameters (continued)
Web Page Item
Description