CyberData 011085, Руководство по эксплуатации

Страница: 24 / 44

Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Operations Guide 930363H CyberData Corporation
17
2.3 Configure the Paging Amplifier Parameters
●
To configure the Paging Amplifier online, use a standard web browser.
●
Configure each Paging Amplifier and verify its operation before you mount it. When you are
ready to mount a Paging Amplifier enclosure, refer to
Appendix A, "Mounting the Amplifier"

for instructions.
●
All Paging Amplifier are initially configured with the default IP settings indicated

in Table 2-8 .
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
Note When configuring more than one Paging Amplifier, attach the Paging Amplifiers to the
network one at a time to avoid IP address conflicts.
Table 2-8. Factory Default Settings
a. Default if there is not a DHCP server present.