CyberData 010881, Руководство по эксплуатации

Страница: 25 / 38

Implementing the VoIP Zone Controller
Set up the Zones
VoIP Zone Controller 4-Port Audio Out Operations Guide 930109C CyberData Corporation
19
2. On the Zones Setup page, enter values for the parameters indicated in Table 2-5 .
3. After changing the parameters, click Save Settings .
Table 2-5. Zones Setup Parameters
Web Page Item Description
Device Name Shows the name of the device.
Beep Before Page Check this box to play a beep before a page is sent.
Bypass DTMF Check this box to send a page without having to enter a two-
digit tone. When enabled, all four zones will be paged without
waiting for DTMF entry.
Enable Check this box to enable the Group.
Zones 1-4 Checkboxes Check the box for the Zones that should comprise this Group.
Group Name Assign an identifier to the Group.
RTFM Announce Check the box for the Zone that you want to hear a RTFM
announcement from.
Click on this button to save your configuration settings.
Changing a parameter that has an asterisk next to it will cause
a system reboot when saved.
Link to the Network Setup web page.
Link to the Admin Settings web page.
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Link to the Home page.