CyberData 010861 930106A, Руководство по эксплуатации

Страница: 28 / 42

CyberData Corporation 930106A VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier 22
Figure 2-13. Firmware Upgrade Page
7. Enter the IP address of your TFTP server into the TFTP Server IP parameter field.
8. Enter the firmware filename of the file to be uploaded into the New Filename parameter field.
For example, kernel filename "201-image-spk-sip.bin".
9. Click Upload File .
Note This starts the upload process. Once the speaker has uploaded the file, the Uploading
Firmware countdown page appears, indicating that the firmware is being written to flash.
The speaker will automatically reboot when the upload is complete. When the countdown
finishes, the
Firmware Upgrade page will refresh. The uploaded firmware filename should
be displayed in the system configuration (indicating successful upload and reboot).
10. Repeat steps 8 and 9 if you are uploading the Kernel and Application files.
For example, Application filename "201-romdisk-spk-sip.img".
Table 2-12 shows the web page items on the Firmware Upgrade page.
Table 2-12. Firmware Upgrade Parameters
Web Page Item Description
System Configuration Shows the current configuration.
Bootname Shows the current boot loader filename.
Kernel Shows the current kernel filename for partition 1 and 2.
Application Shows the current application filename for partition 1
and 2.
VoIP Loudspeaker Amplifier