1. How do I adjust the resolution?
11.1 Troubleshooting
Chapter 11
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
2. Is
an
interference signal appear
ing
on
the
LCD normal when shutting down the computer?
In rare cases, interference may appear on the monitor. This may be caused by signal rate of VGA card and is considered
normal. The image quality can be improved by adjusting the phase or pixel rate automatically or manually.
3. The membrane power light is not
lit?
Press the power On / Off on LCD membrane to check if the monitor is in the ON mode.
Check the power cord is properly connected to the LCD keyboard drawer and power outlet.
4. Screen image is not centered or sized properly
Press the button for two seconds to automatically adjust the image.
Adjust the H-position and V-position settings via On-screen menu.
For S
0'
6
eries
Sun-Specific
LCD Drawer
2. How do I adjust the resolution in MS Windows operat
ing
system?
To change monitor resolution, click Start -> Control Panel -> Display. Select Setting tab to adjust the monitor resolution in
Desktop Area. The available resolutions, "640 x 480", "800 x 600", "1024 x 768", "1152 x 864", "1280 x 1024", are deter-
mined by the display card in your computer.
6. Is the LCD drawer hot-pluggable?
The LCD drawer is hot-pluggable, but components of connected devices, such as the servers and KVMs, may not be
hot-pluggable. We suggest turning off the power to all devices before connecting them. Apply power to connected devices
again only after the LCD receives power.
1. How can I adjust the monitor resolution to 1152 x 900 for SUN Micro system
s
?
The S solution LCD drawer will automatically detect the 1152 x 900 resolution, so no user con
fi
guration should be neces-
sary.
P.51
