manualshive.com logo in svg

Cyber Power Mini Central CPSPV30000ETL Series, Руководство пользователя

Поделиться
Скачать
Cyber Power Mini Central CPSPV30000ETL Series Скачать руководство пользователя страница 33

     

User Manual                                                                              32 / 54                                                                      CPS Mini Central series 

VNNES20103
CPSPV30000ETL
Main Ver:XXXXXX
Comm Ver:XXXXXX

 

Fig6.3.6 Serial number, model name and version 

 
Here is explanation of items on Fig6.3.6: 

 

First line: Serial number of this inverter. 

 

Second line: model name of this inverter. 

 

Main Ver: firmware version of control board. 

 

Comm Ver: firmware version of communication board. 
 

After displaying information of the third interface for 3 seconds, the background light will turn off. 
 

LCD Display when backlight off 

 

After the power on information is displayed automatically and the backlight turns off, the LCD display will switch to 
the following Interface 1. There are 4 interfaces, which can be displayed in turn by single knock. 
 

Interface 1:

 Running state.   

 

The first line displays inverter’s state description, for example, in faulty state it will display Fault and followed 
with faulty codes, which is convenient to compare with error code list in manual.   

 

The second line displays inverter’s states name. 

 

The third line displays energy generated today 

 

The fourth line displays the total energy generated since installation. 

       

State:Fault
 AC V outrange
E_today:  000kWh
E_all:   00.0kWh

                                       

Input Info

V-pv: 620/ 622 V
I-pv:15.8/16.3 A
P-pv: 9796/10139 

     

Fig6.3.7 Interface 1: Running state                Fig6.3.8 Interface 2: Input information 

 

Interface 2:

 Input information.   

This interface displays parameters of PV input, including input voltage, current, and power of each MPP tracker. 

 

V-pv: input voltage of MPPT1 and MPPT2 

 

I-pv: input current of MPPT1 and MPPT2 

 

P-pv: input power of MPPT1 and MPPT2 ,unit is W 

 

Interface 3:

 Output information. See Fig6.3.9 for reference. 

This  interface  displays  output  information  of  inverter,  including  output  voltage  of  each  phase,  output  current of 
each phase, and output power of each phase. 

 

V: output voltage of each phase 

 

I: output current of each phase 

Содержание Mini Central CPSPV30000ETL Series
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды