4
2. Remove the door pin supporting washer from the bottom hinge and reinstall it on
the opposite door pin hinge.
3. Rotate the front door and reinstall it on the opposite side sliding the door pin
hinges into the hinge holes on the enclosure as shown below.
Relocate CyberPower Badge
To relocate the CyberPower badge, pull the two parts apart as shown below. To
re-install the badge measure the vertical and horizontal distance from the edge of the
door as shown below and push both parts together.
NOTE:
Please press hard to make sure the badge has been firmly installed.
3” (76mm)
9.84” (250mm)