Page 8
•
Re-insert the USB cable of the speaker to your PC and switch it to BT pairing mode.
•
Check your Bluetooth source device and be sure you have found t
he section that allows you
to discover new Bluetooth products. If you see the speaker on the list, but cannot connect,
you may need to try and synch again. To start fresh, with your Bluetooth device, select
“Forget this device,” to remove the “Cyber Acoustics Speaker Bar (CA-2890BT)
” from the list.
You may need to turn
off the Bluetooth function on your device to fully clear your list.
• Return to your source device, and re-enable the Bluetooth function. Look for the
“
Cyber Acoustics Speaker Bar (CA-2890BT)
” to show back up on the list.
•
Select the speaker on your screen, and pair it.
Frequently Asked Questions
• If the speaker does not automatically reconnect with your Bluetooth device, you may need
to go into your device’s Bluetooth settings and re-select speaker to reconnect.
•
Be sure to check your room environment. Today’s Bluetooth technology has a designed
limit of approximately 10 unobstructed meters, line of sight.
Your best results will be when
your source device and Speaker Bar are in the same room. Extremely large rooms, or
rooms with lots of wireless electronics, wi-fi routers, radio transmitters, etc, may affect your
ability to pair and connect.
• Check for obstructions, walls or other objects that might impede the Bluetooth signal.
•
Try returning to the source device to a closer proximity with your speakers.
Bluetooth connection
Can’t connect for the first time
Frequently Asked Questions
Possible Solutions
Bluetooth connection
Can’t connect when returning
