Cyber Acoustics CA-2806BT, Руководство пользователя

Страница: 5 / 16

4
Trouble shooting Bluetooth connections
Can’t connect for the first time
1. Turn off the speaker completely and then turn on the speaker. Follow the above manual on Bluetooth Connection
for 1st time connection.
Can’t connect when returning to the speaker system
1. If the system does not automatically reconnect with your Bluetooth-enabled device, you may need to physically
go to your device’s Bluetooth setting and manually select again
“CA 2.0 BT SPEAKER” to reconnect.
2. You may also try going to your device’s Bluetooth settings and select “Forget this device” to remove the speaker
system from the list. You may need to turn off the Bluetooth function on your devices to fully clear the list. Then see
steps above by following the Bluetooth Connection for 1st time connection.
LED status light will show solid Blue. The speaker can only pair with one device at a time. Go to that source
Audio is choppy or keeps disconnecting
1. Be sure to check your room environment. Bluetooth technology has a range limit of approximately
30 feet - line of sight. This generally means your best results will be limiting your source device and speakers to
the quality of sound, connection or connection consistency.
2. Check for obstructions, walls, too many people, or other objects that might impede the Bluetooth signal.
3. Try returning the Bluetooth source device to a closer proximity with your speakers.
• Power – The on/off button is on the right satellite speaker. Rotate clockwise to turn on. Rotate counter-clockwise
to turn the system off.
• Master Volume Control – This control is on the right satellite speaker and is indicated by the word “volume”.
Rotate clockwise to turn volume up or counter-clockwise to turn volume down.
• Source button - Press once to turn from bluetooth mode to AUX IN mode.
• Headphone Output Jack – Connect your favorite headphones to this jack and they will mute the speakers
automatically. The volume controls can then be used to turn up or down the volume to your headphones.
• Light button - Press once to turn driver light on and off.
• Auxiliary Input Connection – The auxiliary input jack allows connection of a second source.
LIGHT AUX
RIGHT
Light button
Auxiliary Input Connection
Power / Master Volume Control
Headphone Output Jack
Source button