CYBELEC DNC 60 GS, Руководство пользователя, Страница: 44 / 72

PAGE 36 USER GUIDE DNC 60 GS
M
ACHINE PARAMETERS
Choice 8 of the main menu
These pages display the function parameters of the machine. They are
programmed when the machine is installed.
MACHINE PARAMETERS -02-
X1:X1 X2:X2
10 Positioning speed ____.__ ____.__
11 Fin approach speed __.__ __.__
12 Indexing speed ____.__ ____.__
13 Manual slow speed ___.__ ___.__
14 Manual high speed ____.__ ____.__
15 A priori voltage __.___ __.___
16 Maximum voltage _.___ _.___
17 Minimum voltage _.___ _.___
18 Offset voltage __.___ __.___
19 SP/SN ratio __ __
20 Max. follow.eror __.__ __.__
21 Surveillance time _.___ _.___
22 Proportional gain _____ _____
Calling these pages from the menu page only allows to display the parameters
but not to modify them.
It is strongly recommended not to modify these values, or only directed to do
so by the manufacturer, CYBELEC company or one of its agents.
We also recommend to keep a written copy of this data so that any
technician can re-program the original values if necessary.