30
31
Video Compression
Format
H.264
Remote control
RS232/RS422
IO port signal return
Support Tally signal return
Interface
SDI in * 1; HDMI in * 1;
Tally output * 1;
Lemo power coordinates *1;
Antenna sub *4; Key * 3;
Ship type power switch *1;
OLED display screen *1;
Np-F970 battery holder *1
SDI output *4; HDMI output *4;
DB9(Tally in) * 1; Antenna sub *4;
Power supply coordinate *1;
Metal power switch *1;
Display screen *1; Key * 3;
Battery button connection seat *1
Temperature
-
10°C - 50°C(Working
)；-
40°C - 80°C(Storage
)
Operating Power Supply
DC 12V/2A
DC 12V/3A
Operating
voltage
7-17V
Power Consumption
10W
20
W
Trouble Shooting
Solutions
Trouble
If mosaic, jams, smear
or frame loss appear
during use
Lift the transmitter and receiver as high as possible,
to 1.5-2m or more;
The antennas are installed in fan-shape and facing for
ward to receiver, and the transmission effect is the best;
The LNA mode is set in H (high-gain mode);
When multiple transmitters work at the same time,
ensure that the transmitters are at least 1m apart from
each other;
If there is still a mosaic or a jam, switch the product
frequency to the other frequency channel.
If in/ out video
resolution not
matching or display
compatibility related
Confirm the software version of the
and contact the technician in time. If the software version
is confirmed to be too old, it is necessary to upgrade
the software.
encoder and decoder
If there is no
connection
during use,
It is divided
into 2 cases:
In close range
(
, if the transmitter
and receiver are connected to 4 antennas, the distance
needs to be extended to 5m, and the LNA mode should
be set to L (low-gain mode); when multiple transmitters
work at the same time, ensure that the transmitters
are at least 1m apart from each other;
situation TX-to-RX<2m)
In the long-distance situation, lift the transmitter and
receiver as high as possible, to 1.5-2m or more; the
antenna is fan-shaped and facing for ward,the LNA mode
is set to H (high-gain mode); when multiple transmitters
works at the same time, ensure that the transmitters
are at least 1m apart from each other.
When the receiving
terminal cannot hear
the other party’s
voice when speaking
one-on-one
a: Confirm whether it is in one-to-one mode;
b: Press the “ALL” button again, and then press the
button at the corresponding transmitting terminal;
c: Whether the headphones are loose; and
d: Whether the headphones malfunction, try again after
replacing the headphones.
