CVW 3062, Руководство пользователя, Страница: 13 / 16

Mode : STA
WiFi IP : 192 . 168 . 1 . 201
Encoder IP
:
192
.
168
.
1
.
111
21 22
Wireless Transmission Module Upgrading
1. The transmitter operates the same as the wireless software upgrade
of the receiver.
2. The back of each device’s body will be labeled with the IP address of
WiFi and the IP address of the encoder/decoder. The default IP
addresses are as follows:
(Take the following figure as an example: The device’s operating mode,
WiFi IP(wireless transmission module IP), and IP of the Encoder/Decoder
can be found.)
First, connect the computer to the LAN port of the receiver;
Then enter the device’s WiFi IP (wireless transmission module IP) in the
address bar to enter the login page:
After successful login, enter the WiFi board parameter page of the device:
Enter username: admin
Enter password: admin
Each transmitter has one wireless transmission module, and the software
upgrading needs to be implemented on each transmitter. Receiver also has
one wireless transmission module, and the software upgrading needs to be
implemented on it accordingly.
Information label on transmitter:
Encoder IP
192.168.1.100
Receiver
Transmitter
Wireless
transmission
module IP
(WiFi IP)
Decoder IP
Wireless
transmission
module IP
(WiFi IP)
192.168.1.201, 192.168.1.202
192.168.1.111, 192.168.1.112
192.168.1.211
，
192.168.1.212