P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
Fig. 3
PIP Size
Front Of Chassis
1/8 PIP
1/4 PIP
·Install the cameras to cover the areas to be viewed.
·Locate yourself at the PIP-200. With the front panel switch, verify that each camera
shows individually on the screen.
·Decide on the size and location of the window that you will use. Example: 1/4 size, 1/8
size location and size of the window.
·Once the split has been decided on, using a Philips head screwdriver, remove the cover.
·Using the jumper, select the desired PIP size. The units are factory preset for 1/8 size.
·Set the front panel switch to the center Split position.
·Begin by adjusting Width start control to set the Horiz position of the window and then
adjust the Height start control to adjust the Vertical window position.
This completes the setup of the PIP-200!
