P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
Model
# Of Inputs
# Of Outputs
Controls
Special Features
MTS-4
4
1
Front Panal
Switches
Each switcher kit should contain each of the following items:
Instruction sheet
Switcher
This product will work with a negative or positive ground system. Any power source other
than a standard CVS supplied power supply must be fused on the (+) or “Hot” leg for
safety reasons. This product is designed to be used in the field where normal AC power is
not available. Battery or solar sources are good as well as AC inverters.
1)
Connect the power connector to the back of the switcher before applying the power to
the fused power source.
2)
The “Scan Rate” Knob controls the speed at which the channels are selected.
3) SCAN;
Place all of the switches in the center position. The LED’s (lights) will
sequence at the rate set by the knob.
4) BYPASS;
By placing the switch up, that position will be skipped when the scan comes
to that position.
5) HOME;
Will freeze the scan to the selected position. If more than one position is
selected, the higher number will be activated.
MTS-4: 4x1 Terminating Video only sequential switcher
