“Quick Set” Cam Adjustment –
Open/Closed
Additional adjustments should not be required
after initial setting. However, should there be a
need to make further adjustments to the CVS
870 Limit Switch, this is easily done at the field
level with only a 5mm hex key to remove the
cover.
Once open, adjustment to fully closed (red cam)
may be made by depressing the cam and
turning in either direction to obtain necessary
adjustment.
The same may also be done for fully open
(yellow cam) by lifting the cam and rotating.
Cams are on a spring loaded splined shaft and
will re seat when let go.
NOTES:
CVS Controls Ltd. strives for the highest levels of quality and accuracy. The information included in this publication is presented for informational
purposes only. CVS Controls Ltd. reserves the right to modify or change, and improve design, process, and specifications without written notice.
Under no circumstance is the information contained to be interpreted to be a guarantee/warranty with regard to our products or services,
applicability or use.
Selection, use and maintenance are the sole responsibility of the end user and purchaser. CVS Controls assumes no liability for the selection use
and maintenance of any product.
Red Cam Adjustment – Fully Closed
Yellow Cam Adjustment – Fully Open