CVS CATS-2, Инструкция по эксплуатации, Страница: 5 / 12

P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
Power Up:
When the CATS-2 switcher is first turned on, the unit will go into alarm and remain until the
internal timer clears. After connecting the video and the Normally open contact closures
to the Alarm input you can adjust timer hold time in the unit. Turning the unit over, there is
a small screwdriver adjustment that will vary the timer. See Fig. 3
Operation:
1) Connect the power supply to the switcher by pushing the power connector into the rear
of the switcher until it can go no further.
2) Plug in the power pack to a 115VAC source. Turn on the switcher by rotating the “Scan
Rate” knob to the right. The speed at which the channels are selected is adjusted by
this knob.
3) SCAN: Place all of the switches in the center position. The LED’s (lights) will
sequence at the rate set by the knob.
4) 1 or 2: Will freeze the scan to the selected position.
The CATS-2 is designed to pass high quality Color video and is packaged in a small, easy
to install housing. With the CVS 5 year warrantee on parts and labor you will realize that
we consider the quality of the product the most important part of our designs. See your
local CVS dealer or call for further information.
Max Min
Fig. 4
Hold Time Adjust