CVS 800229, Инструкция по эксплуатации

Страница: 16 / 33

14
Comment
If it is not possible to fit the cuff to your left arm, it can also
be placed on your right arm. However, all measurements
should be made using the same arm.
Comparable blood pressure measurements always require the
same conditions (relax for several minutes before a reading).
Please consult your physician for any of the following situations:
• The application of the cuff over a wound or inflamed area.
• The application of the cuff on any limb with intravascular
access or therapy, or an arterio-venous (A-V) shunt.
• The application of the cuff on the arm on the side of a mastectomy.
• Simultaneous use with other medical monitoring equipment on
the same limb.
• The blood circulation of the user needs to be checked.
5.4. Measuring procedure
After the cuff has been appropriately positioned the
measurement can begin. Remain still during your measure-
ment, do not flex muscles.
a) Press the START/STOP button. After a series of short
beeps, the pump begins to inflate the cuff. On the display,
the increasing cuff pressure is continually shown.
b) After automatically reaching an individual pressure, the
pump stops and the pressure slowly falls. The cuff
pressure is displayed during the measurement.
c) When the device has detected your pulse, the heart
symbol in the display begins to blink.
d) When the measurement has been concluded, the air will
automatically release from the cuff. The measured systolic
and diastolic blood pressure values, as well as the pulse,
are now displayed.
e) The measurement results are displayed until you switch
the device off. If no button is pressed for 1 minute, the
device switches off automatically.
f) When the unit is set to the MAM (Measurement Averaging
Cuff on
right arm
Pumping
Pressure
Measuring
Measurement
Complete
Systolic
Diastolic
Pulse