2
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
• Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your
finger on the switch or plugging in tools that have the switch ON invites accidents
• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard
hat, or hearing protection must be used for appropriate conditions.
Tool Use and Care
• Do not use tool if switch does not turn it ON or OFF. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of starting
the tool accidentally.
• Store idle tools out of the reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
• Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool's operation. If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended for your tool. Accessories that may be suitable
for one tool may become hazardous when used on another tool.
• Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.
Description
The QG8C-A and QG12C power Pipe Cutters are
designed to squarely cut 2″ to 8″ or 2 1/2″ –
12″ steel pipe. The cutting action is in conjunction with a large diameter cutter wheel. The
cutter wheel is advanced to the pipe via a pivot arm. The pivot arm advances the cutter wheel
by utilizing a hydraulic cylinder and foot pump.
Specifications
Description
QG12C
Motor
750W, induction
Max pipe thickness
8mm
Min pipe diameter
2 inch
Max pipe diameter
12 inch
Standard Equipment
• QG12C Cutter Frame
• Pipe Support
• General Purpose Cutting Wheel
