Cutters Edge MULTI-CUT CE2165RS Скачать руководство пользователя страница 2

1

/

CUTTERS EDGE FIRE RESCUE SAWS

(A)  Cutters Edge  

Fire Rescue Saw

(B) Warranty card

(C)  Cutters Edge Fire Rescue

Saw Operations Manual

(D)  Chainsaw Operators Manual 

(E)  Chainsaw Safety Manual

(F)   Illustrated Parts List 

(G)  Cutters Edge Bar & Chain Oil

(H)  8 oz. Bottle Cutters Edge

2-Cycle Oil

(I)    Allen Wrenches

(J)   Filter Oil

(K)  Grease Gun

(L)  Grease Packet

Your Cutters Edge Shipping Carton Should Include  the Following:

Please take note of the WARNINGS HIGHLIGHTED IN THIS MANUAL and the warning labels attached to
the various parts of the saw and its accessories. Read these warnings and heed their advice. Failure to do
so could result in injury to you and/or damage to the saw. Any warranties provided by the manufacturer
will not cover abuse, neglect or mishandling of the saw.

UNDER NO CIRCUMSTANCES MAY THE DESIGN OF THE MACHINE BE MODIFIED WITHOUT THE
PERMISSION OF THE MANUFACTURER. Always use genuine accessories.  Non-authorized modifications
and/or accessories can result in serious personal injury or the death of the operator or others.  Your
warranty does not cover damage or liability by the use of non-authorized accessories or replacement parts.

WARNING!

Copyright 2001 Edge Industries, Inc 

• All rights reserved. No part of this manual may be reproduced or transmitted in any form or by

any means, electronic, mechanical, photocopying, recording or otherwise, without prior written consent of the publisher. For
information, contact Edge Industries, Inc.

Notice of Liability 

• The information contained in this manual is distributed on an “As Is” basis without warranty. Edge Industries shall

have no liability to any person or entity with respect to any liability, loss or damage caused or alledged to be caused directly or
indirectly by the instructions contained in this manual. The information in this manual is subject to change without notice.

Information in this manual is for 
the following Cutters Edge
Fire Rescue Saw Model Numbers:

CE2165RS-12”, CE2165RS-16”, CE2165RS-20”, CE2165RS/D6, CE2165RS/D8,

CE2171RS-12”, CE2171RS-16”, CE2171RS-20”, CE2171RS/D6, CE2171RS/D8.

CUTTERS EDGE

®

, MULTI-CUT

®

, FIRE RESCUE SAW

®

, BULLET

®

CHAIN, GUARD/DEPTH GAUGE

®

– Patent Numbers:

UNITED STATES -  5,156,156, 5,056,395       FRANCE - 0439085                 ITALY - 0439085           AUSTRALIA - 627393                NORWAY - 176168       AUSTRIA - 0439085      
RUSSIAN FED - 2021885                               BRAZIL - PI 9100284-2           SPAIN - 2055928          CANADA - 2034,798                  SWEDEN - 0439085           
CZECH REPUBLIC - 279.962                          SWITZERLAND - 0439085      FINLAND - 910356       UNITED KINGDOM - 0439085

(A)

(B)

(C)

(D, E, F)

(G)

(H)

(L)

(K)

(I)

(J)

Содержание MULTI-CUT CE2165RS

























Отзывы: