Cutler-Hammer EATON PanelMate ControlNet, Руководство пользователя, Страница: 14 / 43

2-4
PanelMate ControlNet Communication Driver Manual
LED Indicators
Net Status (Item 2)
The Network Specific LED is the upper-right LED on the ControlNet interface card. See page 2 for a side
view of the card. The following table describes the behavior of the Network Specific LED:
LED State Network Status
Off Network interface offline/No network power
Flashing Red I/O Connection(s) in timed-out state or other Recoverable Fault.
Flashing Green Device is online, but has no running connections
Solid Red Unrecoverable Fault
Solid Green Online with established connections
Flashing Green/Red Self-test for A-B devices
ControlNet Interface Status (Item 1)
The ControlNet Interface status LED is the lower-right LED on the ControlNet interface card. See page 2
for a side view of the card. The following table describes the behavior of the UCS status LED.
LED State Status
Off No power
Solid Red Hardware error
Flashing Red Recoverable configuration fault
(Invalid firmware, OEM data, or Personality Block)
Flashing Green No errors
Solid Green No errors
Amber Configuration mode
Channel Status
The Channel Status LEDs are the left-most stacked set of LEDs on the on the ControlNet interface card.
See page 2 for a side view of the card. They are read together when their states change synchronously
to one another.
States Network Status
Off Network interface offline.
Solid Red Network faulted state or other recoverable fault
Alternating Red/Green Network ASIC self test
Alternating Red/Off Incorrect node configuration.
Check ControlNet parameters or node address.
The Channel Status LEDs are read independently when their states change asynchronous to one
another:
States Network Status
Off Network channel disabled. Redundant Cable operation disabled.
Solid Green Online normal operation.
Flashing Red/Off Media fault or no other nodes present.
Check for broken cables, bad connectors, etc.
Flashing Green/Off Device is online, but is encountering temporary errors. Check
termination and cables.
Flashing Green/Red Incorrect network configuration.