Cutech 40180H, Руководство пользователя

Страница: 19 / 40

19
ASSEMBLY & ADJUSTMENTS (cont.)
2. Lower the infeed table to its lowest setting by rotating
Infeed Table Lock Knob “A”
counterclockwise to loosen
and rotate the Infeed Table Lower/Raise Knob “B” clockwise to
lower the table. See FIG 12
3. Place a metal straight edge
at least 24” in length on the outfeed table across the cutterhead
near the fence to check for parallelism. Insert the 4mm Hex Wrench into the end of the
cutterhead and rotate the cutterhead counter-clockwise with the Hex Wrench until the tip
nearest the fence is at its apex. The straight edge should lie flat on the outfeed table and the
cutter tip should just touch the straight edge without lifting or moving it. Move the straight edge
forward and repeat for front edge of table and cutterhead tip nearest front of machine. See
FIG 13 and FIG 14