
Ubitech Ltd.
Version: 0.4.1
6
BVSLWx User Manual
Date: 9-Jun-2021
6 PHYSICAL INSTALLATION
6.1 Quick Installation Instruction:
-
Make sure to disconnected the power.
-
Place the Valve Handle in Close position.
-
Choose right size Fork of BVS and aligning with Valve Handle. *Refer to “Figure 6A”
-
Make sure the Knob and Valve Handle are facing on same side. *Refer to “Figure 6B”
-
Tighten Clamps while holding down the Custos BVS.
-
Unplug the Dust Cover and plug Local Water Sensor Probe into connector tightly. (Optional) *Refer to Figure 6C
-
Connect the power socket to DC Adaptor, screw up the water seal cover.
-
Plug DC Adaptor into AC Power Outlet.
Figure 6A
Figure 6B
Figure 6C
Leak sensor connector
Dust cover
Local water sensor probe
Power socket