Spur Gear Assembly
Spur Gear Assembly
Spur Gear Assembly
Spur Gear Assembly
Spur Gear Assembly
5245 Qty 1
5-40 Locknut
1:1
-Parts for
Bag G
4424 Qty 1
Disc Brake Adapter
1:1
2228 Qty 1
Spacer
4423 Qty 1
Brake Disc
2228 Qty 1
Slipper Eliminator
4966 Qty 1
66T 32P Spur Gear
5252 Qty 2
4-40 x 1/4 BH Screw
- First slide the 4424 Disc Brake Adapter onto the
2228 Slipper Eliminator so the grooves are aligned.
- Press the 4423 Brake Disc onto the 4424 Brake
Adapter and slide the entire assembly onto the
Top Drive Shaft so that the Roll Pin keys into the
grooves.
- Secure the assembly to the Top Shaft with the
2228 Spacer and the 5245 Locknut. Do NOT
overtighten the nut on the Top Shaft!
- Mount the 4966 Spur Gear so the flat side faces
AWAY from the transmission. Secure using (2)
5252 Screws.
STEP #1
4424
4423
2228
4966
5252
2228
5245
Brake Assembly
Brake Assembly
Brake Assembly
Brake Assembly
Brake Assembly
1:1
-Parts for
Bag H
4420 Qty 1
Brake Bracket
1:1
5252 Qty 2
4-40 x 1/4 BH Screw
4421 Qty 1
Brake Shoe
4422 Qty 1
Brake Cam
4425 Qty 1
Clip
- Fir
STEP #1
- Slide the 4421 Brake Shoe onto the 4420
Brake Bracket with both crescent shape cut-
outs facing the same direction.
- Install the Brake Bracket onto the transmis-
sion so that the Brake Disc is between the
Bracket and Shoe.
- Secure the Bracket using 5252 Screw.
-Slide the 4422 Brake Cam thru the small
holes in the Brake Bracket. The lever of the
Brake Cam should be facing the same
direction as the pictures shown.
-Secure the Brake Cam using 4425 Clip.
5252
4420
4421
4422
4425
Transmission Casing
Transmission Casing
Transmission Casing
Transmission Casing
Transmission Casing
1:1
-Parts for
Bag I
3229 Qty 1
Set Screw
1:1
3309 Qty 1
Transmission Brace
1:1
3229 Qty1
Short Body Post
3229 Qty 1
Post Collar
1202 Qty 1
Trans Spacer
5264 Qty 4
4-40 x 1/2 FH Screw
5253 Qty 4
4-40 x 3/8 FH Screw
- Attach 3229 Body Post to 3309 Trans Brace
using 3229 Screw. Slide 3201 Post Collar onto
the Body Post and secure using 3229 Set Screw.
- Secure the Trans to the Chassis using (2) 5253
Screws thru the 3265 Trans Support and (4)
5264 Screws thru the 1202 Trans Spacer as
shown.
- Attach the Trans Brace to the Trans and Rear
Bulkhead using 5253 Screws.
5268 Qty 2
4-40 x 1” FH Screw
3229 Qty 1
8-32 x 1/2 FH Screw
1:1
3309
3229
5268
3265
5253
1202
3265 Qty 1
Trans Spacer
5264
Bag G
Bag G
Bag G
Bag G
Bag G
Bag H
Bag H
Bag H
Bag H
Bag H
Bag I
Bag I
Bag I
Bag I
Bag I
- NOTE: Align the dogbone shafts into the
outdrives of Trans as you mount the trans!
CONED SIDE
OF SPUR GEAR
FLAT SIDE OF
SPUR GEAR