8
Installation Guide
Insert the push pin into the pre-drilled hole in the middle
of the bracket and through the bar of the middle frame to
attach it to the rest of the bed.
Repeat steps 2 to 5 to attach the other center support bracket
to the other side of the bed frame.
5
6
Attaching the bed legs
1
2
Take out the six (6) post bed legs from the accessory box.
Attach the post bed leg to the bed frame by threading it in a
clockwise direction into the pre-drilled holes.
Repeat to attach the remaining bed legs.
Setting up the electronics
1
Connect the cord for the foot lift motor to the control box.
Plug it into the port labeled "Foot Actuator".
Remove and extend the power cord from the frame.
2
Complete bed legs and
electronics assembly
