Custom Engineering s'print, Руководство пользователя

Страница: 18 / 60

1. INSTALLATION AND USE
8 1-
DPT100-B/I/BT
(15) NOTE : The Name ID is used to diversify one printers from another that have the same name,
inside the same area. The index will be added at the end of the name (example: S’print-BT #1). It’s
possible that some BlueTooth wireless remote device don’t update immediately printer name, but only at
the beginning of new connection. This happened because most of remote devices create a relation
table between Bluetooth device address (that is passed on every access) and the identification
name. So the method of research of remote devices is sensibly faster, but it involves that the printer
name (or others devices BlueTooth) is update only sometimes, for the most part it happened at the
beginning of new connection.
(16) NOTE : The authentication is used to enable the password entry, from the host at every connection,
for printing. If someone is enabled to use the printer (and consequently to know the link key), can
execute an operation of “pairing”. When the printer is “paired” with the host, it’s possible to access to
printing service without re-enter the password.
(17) NOTE : The Object Push Profile provides facilities for exchanging business card between client and
server, for pulling business card from a server, and for pushing a limited range of objects onto a server;
for example, a virtual business card wich fit the vCard object format.
(18) NOTE : This parameter is present only if RS232 interface is set.
The “ Name ”, “ PIN ”, “ Name ID ” and the “ Authentication ” values become actives only turning off and
then turning on the printer; reset commands or reset after set up don’t get actives those setting.
1.4 HEXADECIMAL DUMP
This function is used to display the characters received from the communications port; after the reception of
each 6 characters from the communications port, the printer prints out both the hexadecimal code received as
well as the corresponding ASCII code.
Shown below is an example of a Hexadecimal Dump:
48 65 78 61 64 65
Hexade
63 69 6D 61 6C 20
cimal
64 75 6D 70 20 66
dump f
75 6E 63 74 69 6F
unctio
6E 20 30 31 32 33
n 0123
34 35 36 37 38 39
456789
61 62 63 64 65 66
abcdef
67 68 69 6A 6B 6C
ghijkl
6D 6E 6F 70 71 72
mnopqr
73 74 75 76 77 78
stuvwx
79 7A
yz
1.5 SIXLOAD
The printer has been designed with an easy paper load system to improve handling and simplify use.
This easy paper loading system is called “ sixload ” because when the paper is loaded into the printer, it looks
like the number “6” (the roll on the bottom with the edge lifted).