Custom Dynamics®
ProBEAM® RoadGlide
™
LED Headlamp
Installation Instructions
We thank you for purchasing the Custom Dynamics® ProBEAM® LED headlamps! Our products utilize
the latest technology and high quality components to ensure you the most reliable service. We offer
one of the best warranty programs in the industry and we back our products with excellent customer
support, if you have questions before or during installation of this product please call Custom Dynam-
ics® at 1(800) 382
-
1388.
7
-
2018
Package Contents:
-
ProBEAM® LED RG Headlamps (1 pair)
-
Front Mounting Plate (1)
-
Rear Support Plate (1)
-
1/4”
Bolts (2)
-
1/4”
Nuts (2)
-
Plastic Clip (1)
-
Instructions
Part Number: PB
-
RG13
-
C, PB
-
RG13
-
B
Important:
Due to the increased light output from this unit, it is rec-
ommended you take the vehicle to a dealer to have the headlamp
properly adjusted. Weight and tire pressure can affect the position of
the light.
Warning:
To prevent possible electrical shock, disconnect the nega-
tive Battery terminal before installing this product.
ATTENTION
Please read all Information below before Installation
Fits:
2013 & earlier
Harley
-
Davidson® Road Glide® models.
1.
Disconnect the vehicle battery negative [
-
] terminal.
2.
Carefully remove the factory front fairing and turn
signal support bracket from your bike, being careful
that all electrical components are unplugged proper-
ly. If unsure of this process, consult detailed service
manual.
3.
Remove front plastic headlamp cover from the fair-
ing, this should pop out of place.
4.
Locate the 3 adjuster retaining clips (usually green in
color) on the back of the fairing holding the OEM
headlamp in place. Push in on both sides of each
clip, one at a time in order to release the headlamp
and headlamp mounting assembly from the fairing.
Be careful as the weight of the stock lights may
cause unit to release quickly. (See Figure A)
5.
If present, cut off the existing plastic tab located be-
tween the two headlamp openings on inside of fair-
ing in order to make room to mount the Rear Support
Plate (See Figure B)
6.
Grind Flush (See Figure C)
B
A
Installation:
C
Questions? Call us at: 1 (800) 382
-
1388 M
-
TH 8:30AM
-
5:30PM / FR 9:30AM
-
5:30PM EST
