Installation Instructions
-
Page 2
Questions? Call us at: 1 (800) 382
-
1388 M
-
TH 8:30AM
-
5:30PM / FR 9:30AM
-
5:30PM EST
06
-
2017
Cage Clamp #1
Black Wires From
LEDs
Cage Clamp #2
Red Wires From
LEDs
Cage Clamp #3
Blue Wires From
LEDs
Cage Clamp #4
Green Wires From
LEDs
12V Battery
Black
Red/fuse
White
Orange
Blue
Green
CCM Remote
LE
D
LE
D
LE
D
Fuse
Switch
Custom Dynamics®
CCM
CCM Remote
Controller
Magical Wizard
™
4 Wire LED Pod
Black
Red
Blue
Gr
ee
n
Winter Kill Switch
(sold separately)
LED Positive Power [ + ]
Red LED Negative [
-
]
Blue LED Negative [
-
]
Gr
ee
n
L
E
D
Ne
g
a
ti
ve
[
-
]
Red
Custom Dynamics®
CCM
-
6BT
For joining large quantities of wires, we recommend using cage
clamp connectors (included with all Magical Wizard
™
lighting kits).
The cage clamps offer easy connection of the LEDs to the CCM
Remote. Strip back enough insulation on the wires and follow the
diagram below.
Yellow
Vehicle Brake Wire (Optional)
8.
Once wiring is completed, clean up installation and secure the module.
9.
Re
-
connect the negative battery terminal, then use the Key Fob to test the
LEDs. See page 3 for Key Fob features.
Installation Continued
Brake Mode Important Notes
: The Brake mode will interrupt the light programming and change to red when the
brake is applied. Brake function will function on lighting system even if lights are off, a Kill switch is recommend-
ed. Do NOT wire in after a Magic Strobe brake flasher, to prevent accent lights from flashing during braking. If
you decide not to use this feature, disconnect the wire and cap off to prevent shorting.