Custom Crimp D205WB Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 17

Custom Crimp D205WB Series Скачать руководство пользователя страница 16

D205WB / D206WB

Service Hose Crimper

16

CustomCrimp® “No-Nonsense” Warranty Statement

All CustomCrimp® Products are warranted to be free of defects in workmanship and materials for one
year from the date of installation. This warranty ends when the product becomes unusable for reasons
other than defects in workmanship or material.

Any CustomCrimp® Product proven to be defective in workmanship or material will be repaired or replaced
at no charge. To obtain bene

fi

ts of this warranty,

fi

rst, contact Warranty Repair Department at Custom

Machining Services at

(219) 462-6128

and then deliver via prepaid transportation the complete hydraulic

product to:

ATTN: WARRANTY REPAIR DEPT.
Custom Machining Services, Inc.
326 North Co. Rd 400 East
Valparaiso IN 46383

If any product or part manufactured by CustomCrimp® is found to be defective by CustomCrimp®, at its
option, CustomCrimp® will either repair or replace the defective part or product and return via ground
transportation, freight prepaid.

CustomCrimp® will not cover any incoming or outgoing freight charges for machines sold outside
The United States.

This warranty does not cover any product or part which is worn out, abused, altered, used for a purpose
other than for which it was intended, or used in a manner which was inconsistent with any instructions
regarding its use.

Electric motors are separately warranted by their manufacturer under the conditions stated in their separate
warranty.

CUSTOMCRIMP

®

“NO-NONSENSE” WARRANTY STATEMENT

«
...
14
15
16
17
»

Содержание D205WB Series


















Отзывы:

Нет отзывов