Custom Audio Electronics PP54 EVO, Руководство пользователя

Страница: 49 / 88

6.5 Operation parameters
The device allows the coniguration of the parameters listed in the following table.
The parameters marked with the symbol D are the default values.
Settings remain active even after the device has been turned of and they are stored in non-volatile memory.
SPEED / QUALITY Setting of printing speed and printing quality:
High Quality
Normal
High Speed
D
SPEED TICKET IN (mm/s) Set the autoload speed for ticket through front input:
from 60 to 250 (150
D
)
SPEED TICKET OUT (mm/s) Set the ejecting speed for ticket through front input:
from 60 to 250 (150
D
)
TICKET LEN F1 (1/10mm) Set the value for length of ticket loaded in feeder 1 (expressed in tenths of a millimeter).
To correctly measure this parameter, see
paragraph 5.3 .
from 839 to 956 (856 D )
TICKET LEN F2 (1/10mm) Set the value for length of ticket loaded in feeder 2 (expressed in tenths of a millimeter).
To correctly measure this parameter, see
paragraph 5.3 .
from 839 to 956 (856 D )
MIN TICKET IN (1/10mm) Set the minimum value for length of the ticket portion to be inserted into the front inlet
(expressed in tenths of a millimeter):
from 800 to 856 (813 D )
MAX TICKET IN (1/10mm) Set the maximum value for length of the ticket portion to be inserted into the front inlet
(expressed in tenths of a millimeter):
from 856 to 956 (898 D )
TICKET GAP F1 (1/10mm) Set the value for length of the gap between tickets loaded in feeder 1 (expressed in
tenths of a millimeter). To correctly measure this parameter, see
paragraph 5.3 .
from 0 to 40 (10 D )
TICKET GAP F2 (1/10mm) Set the value for length of the gap between tickets loaded in feeder 2 (expressed in
tenths of a millimeter). To correctly measure this parameter, see
paragraph 5.3 .
from 0 to 40 (10 D )
49