Custom Audio Electronics Kube Scanner 120, Руководство пользователя

Страница: 83 / 88

11.9 Printer setup
Embedded Web Server
Device permits the coniguration of default parameters for device and network setup by entering the “PRINTER SETUP”
page and the “NETWORK SETUP” page of the “PRINTER SETTINGS” section of the embedded Web Server (see the
following igure).
Network Setup
Email Setup
Printer Setup
Email Log
Web Site
PRINTER SETTINGS
< Device name >
< PR
INT
ER
>
DEVICE INFO │ PRINTER SETTINGS │ PRINTER SUPPORT
Autofeed
Printer Emulation
Busy Condition
Chars/inch
Print Density
Print Mode
Paper Width
Speed/Quality
Notch Position
Paper Threshold
Notch Distance
Notch Threshold
Paper End Buffer Clear
Ticket Locking
RS202 Data Lenght
RS232 Baud Rate
CR disabled
A=15 B=20 cpi
RxFull
Normal
0%
High Speed
82 mm
115200 bps
8 bits/chr
40 %
Disabled
40 %
Disabled
+0.0
CUSTOM/POS
Disabled
< PRINTER > Printer Settings
COM Port Settings
January, 2015
Select date
<< < Today > >>
?
wk Sun
16
17
18
19
20
1
8
15
22
29
21
2
9
16
23
30
3
10
17
24
4
11
18
25
5
12
19
26
6
13
20
27
7
14
21
28
31
Sat Fri Thu Wed Tue Mon
Time:
12 : 00
Apply Date and Time
Mass Storage / FTP Server
It is possible to conigure the default parameters for device and network setup by editing the “Setup.ini” ile on the device
Flash Drive.
You can enter the Flash Drive by iles sharing from Mass Storage or by iles sharing from FTP Server connection (see
par.11.1).
In both cases, the relative parameter should be enabled during the coniguration process (see chapter 5).
After editing device’s parameter, simply save the “Setup.ini” ile to make the modiies activated.
83