Custom Audio Electronics Kube II, Руководство пользователя

Страница: 39 / 80

FONT TYPE Setting of the Font Type:
International D = Enables the use of font tables to 256 characters
Chinese GB18030 = Enables the use of the Chinese extended font GB18030-2000
Korean PC949
= Enables the use of the Korean extended font PC949
NOTES:
When the Chinese and Korean font is enabled, the selection of the character code table is suspended
(parameter “CODE TABLE”). When the Chinese and Korean fonts is disabled, it returns the character code
table previously in use (parameter “CODE TABLE”).
Parameter present only with release HW ≥ R6 (see on the label).
CODE TABLE [num]
Identiier number of the character code table to use.
The numeric value of the identiier is made up with the following two parameters for the
setting of two digits for the tens and the units:
CODE TABLE [num x 10]
Setting the digit for tens:
0
D
2 4 6 8
1 3 5 7 9
CODE TABLE [num x 1]
Setting the digit for units::
0 D 2 4 6 8
1 3 5 7 9
NOTES:
See the paragraph 7.6 to learn about the character tables corresponding to the identiication numbers set
with this parameter.
The character tables set with this parameter are the same set with the command 0x1B 0x74 (refer to the
Commands Manual of the device).
Parameter present only with release HW ≥ R6 (see on the label).
PRINT DENSITY Adjusting the printing density:
-50% -12% +25%
-37% 0
D +37%
-25% +12% +50%
39