Custo Med Ergometer custo ec5000, Руководство по эксплуатации

Страница: 32 / 66

32
Ergometer custo ec5000 | EXT 0001 – DK 1585 | Version 001 – 2015-11-13
EKG T
YPE
The selected EKG Type determines the communication
method with the ECG recorder, PC-based ECG system, etc.
To prevent an accidental change of this setting, the menu
is protected with a password.
Using the arrow keys, enter 003 and confirm the entry
with SELECT.
All ergometers support the following communication
modes:
• Analog with pulse
Remote start mode; before advancing to the next load
level, the ergometer generates a control pulse and
sends the corresponding data via the interface.
• Analog / Digital
An analog voltage controls the load - blood pressure
measurements can be initiated with digital commands.
• Digital (default)
The communication with the ergo meter is entirely
controlled with digital commands.
• Analog IN-OUT
The entire communication (load control and BP mea-
surements) is controlled with analog signals.
No digital data will be sent.
Select the communication mode and confirm with SELECT.
S
ELECTING THE ERGOMETER COMMUNICATION MODE
Note
• The EKG Type needs to be selected only when the ergometer
is connected to an ECG unit. The selection is part of the
installation procedure.
• The “Analog/Digital” and “Digital” communication is only
possible when PC Mode is selected from the main menu or
when this is the default mode.
E
NTERING THE
EKG T
YPE PASSWORD
EKG Type
Service Code
003
Select
EKG Type
Analog with pulse
Analog / Digital
Digital
Analog IN-OUT
Select