Cushman 646442, Руководство пользователя

Страница: 99 / 184

5
-11
operation
5
(1) battery
if the battery is discharged and the
engine cannot be started, it is possi-
ble to start the engine by connecting
the discharged battery to a battery
from another vehicle or other extra
battery.
1. check that the voltage of the dis-
charged battery is the same as
the voltage of the other vehicle for
jump start (specification for this
vehicle: 12 V).
2. check the length of the jumper ca-
bles and position another vehi-
cle near the vehicle with the dis-
charged battery. then, put the
shift lever in the neutral position,
apply the parking brake, and stop
the engine.
3. wear protective glasses and
gloves and open the battery cover
of both vehicles. remove the bat-
tery terminal cover as necessary.
4. connect the alligator clips on both
ends of the red positive cable to
the positive terminals of both bat-
teries.
5. connect one clip of the black neg-
ative cable to the negative termi-
nal of the normal battery and the
other clip to the vehicle body with
the discharged battery. make sure
to connect the clip to the body part
without paint.
6. start the engine of the vehicle
with the normal battery.
7. start the engine of the vehicle
with the discharged battery.
8. Disconnect the black cable from
the negative battery terminals of
both of the vehicles.
9. Disconnect the red cable.
10. run the engine for at least 30
minutes to charge the discharged
battery.
11. if the battery is discharged again,
replace it or check the charging
system, such as the alternator.
UUVO508A
JUMP.START
UTV-EZGO-Hauler 4X4 Diesel-05.in11 11 2015-05-26 오전 9:33:14