Cushman 622010, Руководство пользователя

Страница: 30 / 76

INTRODUCTION
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
3 - 4
3
2. LOW OIL PRESSURE INDICATOR LIGHT
A low oil pressure indicator light is located on the dash panel. The light illuminates when the oil pressure is low.
Check oil level. If oil level is between ADD and FULL mark on dipstick, a mechanical problem exists within the engine
and the vehicle
must not be driven . Contact a local distributor or authorized branch
3. FUEL GAUGE
The fuel gauge (if equipped) will either be located on the dash panel (electric) or directly on the fuel tank (mechani-
cal).
4. Direction Selector
To reduce the possibility of component damage, the vehicle must be completely stopped before moving the direc-
tion selector.
Located on the seat support panel, this lever permits the selection of either ‘F’ (forward) or ‘R’ (reverse). Vehicle
should be left in ‘F’ when unattended.
5. Accelerator Pedal
Unintentional movement of the accelerator pedal will release the park brake and may cause the
vehicle to move which could result in severe injury or death.
With the key switch ‘ON’, depressing the accelerator pedal starts the engine. When the pedal is released, the engine
will stop. To stop the vehicle more quickly, depress the service brake.
If key switch is ‘ON’ and park brake is set, depressing the accelerator inadvertently will release the park brake and
will cause the vehicle to move which could cause severe injury or death.
Depressing the accelerator pedal will release the park brake if it is engaged. This is a feature to assure the vehicle is
not driven with the park brake engaged. Depressing the accelerator pedal is
not the preferred method of releasing
the park brake.
Depressing the lower section of the brake pedal is the preferred method of releasing the park brake to assure the
longest service life of brake components.
6. Brake and Park Brake
The brake pedal incorporates a park brake feature. To engage, push down on the upper section of the pedal until it
locks in place. The park brake will release when the service brake pedal is depressed. Use the lower section of the
brake pedal to operate the service brake system.
7. Horn
The horn is operated by pushing the horn button located on the floor to the left of the brake pedal.
NOTICE