Cushman 1600XD4, Руководство пользователя

Страница: 117 / 168

7
-11
MaiNteNaNce
7
10. Install the filler cap.
11. start the engine and run it at a
low speed without load. then,
check if any oil has leaked.
(1) Drain plug
4. place a container under the drain
plug and remove the drain plug to
drain the oil to the container. be
careful as the engine oil may be
hot.
ChANGING ENGINE oIl AND fIlTER (f)
1. Warm up the engine oil by operat-
ing the engine for approx. 10 min-
utes or driving the vehicle.
2. park the vehicle on level ground,
stop the engine and apply the
parking brake firmly.
3. remove the inspection shield and
seat cushion.
UUVO709A
(1) Oil filter
5. remove the oil filter through the
inspection shield and discard it.
6. Apply a thin film of oil to the rub -
ber O-ring of a new oil filter. Then,
install it by tightening it firmly to its
end by hand.
7. Install the drain plug firmly.
UUVO710A
(1)
Filler Cap
8. Open the filler cap and slowly add
new oil.
9. the engine oil capacity for this ve-
hicle is as follow.
oil Capacity 0.85 u.s.gal. (3.2 l)
U12O711A
UD120-OM-1600XD4-07.indd 11 2014-05-08 오후 3:33:54